Home > Wireline Pressure Control Equipment >

Nickel Alloy 15k Quick Test Sub Wireline Pressure Control Equipment

Product Categories

Wireline Tool String [156]
Wireline Pressure Control Equipment [141]
Gauge Cutter Wireline [47]
Wireline Pulling Tool [95]
Wireline Fishing Tool [75]
Sand Pump Bailer [8]
Wireline Lock Mandrel [15]
Wireline Running Tool [29]
Coiled Tubing Tools [16]
Wireline Pressure Gauge Hanger [17]
Spooling Unit [5]
Pressure Test Pump [1]
E Line Tools [1]

Ruixin Energy Equipmnet

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Nickel Alloy 15k Quick Test Sub Wireline Pressure Control Equipment

Ask Lasest Price
Brand Name :	Ruixin
Model Number :	2inch ID 3inch ID 4.06inch ID 5-1/8inch ID
Certification :	API
Price :	USD 1500~
Payment Terms :	T/T
Supply Ability :	1 set 4 weeks
Delivery Time :	4-8 weeks

Add to Cart

Product Details
Company Profile

Nickel Alloy 15k Quick Test Sub Wireline Pressure Control Equipment

Nickel Alloy 15k Quick Test Sub Wireline Pressure Control Equipment

5K Wireline Quick Test Sub Wireline Pressure Control Equipment

Ⅰ. Introduction

During Wireline operations it is necessary to break the quick union between the lower lubricator and the BOP to remove the tools within. When this joint is reconnected it is normal practice to fill and pressure test the entire lubricator system prior to opening the wellhead valve. The Wireline Quick Test Sub allows for only the joint that was broken to be tested, without filling the whole lubricator system, saving a substantial amount of time and large volumes of expensive test fluid, as well as alleviating the problems associated with dumping test fluids into the well.

II. General Technical Parameters

OTIS Quick Union

Bore	Work Pressure	Service	Connection	Seal Dia.
2.5＂	5K 10K	Std H₂S	5＂-4ACME	3.5＂
3＂	5K	H₂S	5＂-4ACME	3.5＂
3＂	10K	Std	5＂-4ACME	3.5＂
3＂	10K	Std H₂S	5-3/4＂-4ACME	4＂
2.5＂	15K	H₂S	5-3/4＂-4ACME	4＂
4＂	5K 10K	Std	6-1/2＂-4ACME	4.75＂
3＂	15K	Std H₂S	7-1/2＂-4ACME	5.5＂
5＂	5K	Std H₂S	8-1/4＂-4ACME	6.188＂
4＂	10K	Std H₂S	8-3/8＂-4ACME	5.25＂
5＂	5K 10K	Std H₂S	9＂-4ACME	6.75＂
4＂	15K	Std H₂S	9-1/2＂-4ACME	6.25＂
6.38＂	10K	Std H₂S	11-1/2＂-4ACME	8.25＂

Ⅲ. Maintenance

After using this product every time, check whether the thread, Sealing surface and O-ring are damaged. If everything is normal, apply lubricating grease to the thread and sealing ring, and take protective wire for storage. If any damage is found to the O-ring or sealing surface, the

manufacturer shall be contacted in time for repair and replacement.

Product Tags:


*From:	Your email address is incorrect!
*To:	Ruixin Energy Equipmnet
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!