Sign In | Join Free | My himfr.com |
|
Ask Lasest Price | |
Brand Name : | Ruixin |
Model Number : | 2inch ID 2.5inch ID 3inch ID 4.06inch ID 5-1/8inch ID |
Certification : | API |
Price : | |
Payment Terms : | T/T |
Supply Ability : | 1 set 3 weeks |
Delivery Time : | 3-5 weeks |
Wireline Wellhead Adapter Slickline Pressure Control Equipment
I. Introduction
The Wellhead Adapter is used to connect the blowout preventer and
the wellhead, the upper part of which is connected to the blowout
preventer, and the lower part is connected to the wellhead.
Wellhead Adapter are sealed by threads. When in use, wrap the
thread with PTFE tape or apply anti-sticking grease on the thread,
and then directly tighten the Wellhead Adapter on the thread of the
wellhead.
II. Pressure test:
The Wellhead Adapter shall be tested for compressive strength
regularly, and the test pressure shall be 1.5 times the working
pressure.
1. Install the pressure test connector and connect the pressure
test pipeline;
2. Start the pressure test pump for pressure test: press to the
test pressure, keep the pressure for 15 minutes without leakage,
and fill in the test record card.
III. Daily maintenance:
1. Pressure test should be carried out regularly;
2. When not in use temporarily, you should bring the protective
wire for storage.
Welcome to contact us at any time.
![]() |