0.108Inch～0.125Inch Wire Hydraulic Stuffing Box And Hand Pump And
Hose Pressure Control Equipment
Introduction
The hydraulic stuffing box is a ground pressure control device used
to seal the wire in the wireline operation. The sealing of the wire
is realized by the rubber sealing disc. The stuffing box is
equipped with a preventer plug to seal downhole pressure after a
wire break. The pressing mode of sealing disc is hydraulic remote
control and manual. The Stuffing box is mainly composed of three
parts: pulley support assembly, body assembly and control cylinder
assembly.
Technical specification
Specification 16” 5K Hydraulic
Applicable Wire Size 0.108Inch～0.125Inch
Pulley diameter 16Inch (406.4mm)
WORK PRESSURE 5000psi(35Mpa)
CONNECTION 5-4ACME.OType
Safety load 25KN ( Wireline 12.5KN)
weight 27.5kg
Any size can be customized according to customer requirements.
Performance test:
1. Tie the knot at the stopper of the hydraulic stuffing box after
the steel wire is pierced from the upper part;
2. Install the pressure test connector and connect the pressure
test pipeline;
3. Connect the hand pressure pump line to the control cylinder, and
first press to 21MPa; Manual capping can also be used to tighten
the sealing steel wire;
4. Start the pressure test pump for pressure test, the test
pressure is 52.5MPa, hold the pressure for 15 minutes, fill in the
test record card.
Notes
1 After adjusting the hydraulic cylinder and adjusting the bearing
clearance properly, pay attention to tightening the hexagon flat
end setting screw;
2. Regularly add sealing grease to the deep groove ball bearing on
the pulley shaft;
3. Pulley bearing with grease, such as blocking or abnormal sound
must be replaced immediately;
4. Storage or transportation should be fixed firmly to prevent
bumping pulley.
◆About Baoji RuiXin Slickline Tools
Baoji Ruixin Energy Equipment Co., Ltd. was established in 2012. It
is an IS0: 9001-2015 and API Q1 system certified technology
research and development organization specializing in the design
and manufacture of steel wire, cable and coiled tubing tools. With
strong new product research and development capabilities, it has
obtained 12 national utility model patent certificates and 1
invention patent certificate. Undertook two prefecture-level and
provincial-level scientific research projects. Our products include
wireline wireline wellhead blowout prevention equipment, wireline
downhole tools and coiled tubing downhole tools. At present, we
have provided professional equipment and technical support to more
than 50 oilfield service companies in various regions at home and
abroad.
◆Strict quality control system
Steel wire working tools are certified by API, and all
manufacturing are strictly in accordance with API system, including
quality control management, environmental management and
occupational health and safety management. For each wire working
tool and each part, we have achieved traceability from raw
materials, production process to product shipment.
◆Hard work, after-sales service
On-site technical guidance exchanges with each other. Our sales and
technical personnel communicated well with front-line engineers and
technical experts on the job site, and solved technical problems
such as material selection, sealing structure optimization, and
accident handling in complex environments. And carried out many
technical exchanges and friendly cooperation. We have done a good
job of product after-sales service for customers, and we provide
customers with more satisfactory services. We would like to thank
more and more customers for their support and trust. In the future,
we will do better.
Welcome to contact us at any time.
